Recent content by galao

Synergy/MTS Forum

Help Support Synergy/MTS Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. G

    RM100 w/ Dual Channel Mod MIDI question

    The MIDI-floorboard should be able to send Program Change messages and have at least six buttons to access all channels. Harley Benton MP-100 is quite cheap and works properly. If you have a higher budget you could consider a Morningstar board.
  2. G

    Rm 4 w/ ground control pro?

    The fuse on the MIDI-board is only of interest if your floorboard gets power from the amp. Most likely you have to remove the top cover to match the MIDI-channel of the RM4 and ground control. As mentioned above you could also try to set the GC to OMNI mode.
  3. G

    Is it ok to hot switch SYN2

    Hot swapping is the main reason why MTS amps get damaged. The Synergy manuals clearly say that the amp must be turned off before swapping moules. Also older Randall and Egnater amps are very sensitive to hot swapping, e. g. the MIDI-board will fail sooner or later. Better don´t do it, even if...
  4. G

    RM4 Effect Loop question

    You would need an external looper.
  5. G

    Module screw snapped off inside chassis

    If your amp is an RM100 or RM4 you could take it apart to get access to the back of the thread. The screw is a bit longer than the thread insert. You can use pliers to unscrew the remains and remove it from the back side.
  6. G

    Foot control for 4 modules ????

    As every dual module has two channels, you will need a MIDI foot controller with at least eight buttons to access all channels.
  7. G

    RM100 MIDI footswitch stopped working- suggestions?

    The fuse on the MIDI board only interrupts AC for the footswitch. If the footswitch still lights up without an external power supply the fuse can´t be defective. But without a response and detailed information it´s impossible to give further assistance.
  8. G

    RM100 MIDI footswitch stopped working- suggestions?

    How do you apply power to the footswitch (external power supply or 7-pin-MIDI-cable only)?
  9. G

    RM4 Dual Channel Mod

    Yuneo-website has been updated to the newest PHP-version now, which should solve the Paypal-checkout-issue.
  10. G

    SUMMER SALE

    Please help support the animal shelter in La Linea. Auctions are ending at 9.00 pm CET today. Thanks! :)
  11. G

    SUMMER SALE

    Yes, I am happy to ship the dual channel set anywhere you want. The idea after this campain is to support a huge animal shelter in Spain/Gibraltar. The founder has passed away this summer and the organisation does not have any legal document to stay on the land. Either they are able to buy the...
  12. G

    SUMMER SALE

    -2 x RM100 and -2 x RM4 dual channel mod kits Buyers will receive full warranty + invoice All auctions starting at 1,- https://www.ebay.de/itm/323847445632 https://www.ebay.de/itm/323847446226 https://www.ebay.de/itm/323847455279 https://www.ebay.de/itm/323847455818
  13. G

    Are new Synergy Modules compatible with RM4?

    The guide will work for the RM4 only. If anyone is interested, just send me your email address.
  14. G

    Are new Synergy Modules compatible with RM4?

    Yes, the boards can be purchased here: https://yuneo.de/ In some RM4s Synergy modules don´t fit into the first module slot. I´ve also written a short guide of how to fix this issue. If someone is interested, I can email the pdf file. Cheers, Paul
  15. G

    Randall Modern to Orange Rockerverb - Sorted

    Don´t forget that V2B of the Marshall Brit style PCB is a cathode follower. The Rockerverb has no CF in this position. Instead the tonestack must be connected to the anode of the last GS. As you have a spare GS on the module you could cut traces to remove the CF and connect the tonestack with V2A.
See more
Top