Recent content by laxcdn

Thx for the help. The Randall RM100 is too heavy and 100w too much for the gigs I play and wanted to go with a couple of smaller Egnater Tweakers into 2 cabs. I might look at going with either the Rebel 30 combo or Blackstar HT20 combo into my cab. Basically I was looking at making my right...

hey guys, I am thinking about going with 2 single channel heads into 2 cabs for my new stage gear. I was going to run one clean and one distortion and run my efx pedals into the clean amp. I would run both in tandem all the time except when I need just the clean and then I would use some sort...

Right now I use a Egnater 2x12 and a G&K 2x12 with the head. I don't think I can pull 2 tubes and use the 2 cabs still? I did pull the tubes for a bit and tried the E34L's in it. Might try going back to that so it breaks up earlier. Do you get a drop in wattage when going from the 6L6 to the...

Good info as I am pondering selling my RM100 for 2 RM22's.

I did 2 e34l's on the outside and 2 6l6 and I found it gave it more headroom and a bit more punch. The Lynchbox uses el34's instead of 6l6's

Thx, will set the switch to 4ohm and start trying the new cab. So tell me if what I heard is correct. I was told to compare it to hoses. If the head has a 4" hose and that runs to a 16" hose that is fine cause there is no back pressure but you can't do a 16" hose into 4" cause the water can't...

I have a question about running 2 cabs. I have 2 2x12 8ohm cabs. So I plug one into the main and one into extension, do I switch it to 8 or 16 ohm. I assume either way, if I keep it at 8 ohm the head will be fine since the impedence is lower coming out of the cab.

Cool stuff. Make sure no one gets hurt with those flying bras:)

We will hopefully get some pics up. We play everything from Beatles to April Wine, Danko Jones, STP, Puddle of Mudd, etc. I have some pics up at myspace.com/mrmeanerswinnipeg I use a Clean, Grail and Ultra XL and have a Plexi in the box. Gonna make a 2x12 to go on top of the Egnater...

We are playing a local bar 13th and 14th. The RM100KH to get another workout:)

I just put the 6l6 tubes back in from the e34l and set them all to about 32mv. Should I increase that a bit? I think they are stock JJ tubes. This is from the RM100 manual BIAS READINGS: 6L6/5881 28mV to 35mV EL34/6CA7 30mV to 38mV E34Ls 35mV to 45mV 6550 35mV to 45mV

I love that all white cab. I am making a 2x12 and want to do all white or with white racing stripes and white grill cloth. Am in the middle of changing the faceplate on my RM100 head to white with the LB logo.

Read a few threads about some cab choices, but I have heard a lot about the GFlex and have kinda wanted one for years, but couldn't find one. I have an Egnater Tourmaster 2x12 with the Celestion Custom 80's. I have bought a set of Warehouse Speaker Veteran 30's to try. So I saw a GFlex in...

I am mixing EL34 and 6L6 right now. The EL34 are in the middle and it seems to be a bit brighter and more focused. I do think it has a little less breakup too, but I am going to try just using 2 EL34 in a 50w mode and then try 2 6L6 to see what difference I can hear. If you use EL34 you are...

Right now Clean, Grail and Ultra XL.