Recent content by matam

This looks like the Diezel ones to me

Sorry no new info, i didn't have much time to work on the project. Because my RM100 comes from an old batch and have the old powerboard revision, and it arched in the same place as many other forum users here the first time i pushed the master volume a little over 13:00. I contacted randall...

I didn't and i think it's a nice idea, thanks. Another thing i've had in mind is an instrument/line level switch for the loops; i should check also the input of the amp, we've half valve that isn't used there.

I'm gonna rebuild the power board of my RM100 and while i'm at it i think i'll do a couple of mod on it. I'm researching a way to implement a switch that let me select between 4 power tube or one of the two pair; assuming we use mixed powertube it will have the option to chose wich pair to use...

Sorry for the late answer, i was kinda busy these days; Here you can find the schematics for the mod in diptrace format, and this is the custom library i've used for the drawing. You could check, if interested, the other mod made for the XTC.

I've (crappy :D ) drawn the layout of the revisited schematics above with all the wiring. You can download it here , if you have any question about it feel free to ask. Some more info: You have to lift 1 joint from the pcb (as shown on the picture) on the following parts: R3 - R18 - C2 - C10...

I've made a revision regarding both plexi and red/blue switches. Here you can view and download the new schematics

To add the structure switch desolder C10 from the board, then make sure you remove any lead residue. Now put one lead of the radd2 together with the + lead of C10 and solder them back in the + joint of C10 on the board. Solder together the - lead from C10 and the other lead of radd2 and wire it...

I made a mistake in the schematics, C20 should be C18. Here's the corrected schematics. Regarding the mod (structure, plexi, red/blue switches) i've drawn the schematics of it but since i lended my xtc to a friend of mine to try it out during the holidays i couldn't check if they're right...

Thake a look at this schematics, it shows the preamp section of the ecstasy. The second "ROW" in the schematics is the overdrive channel. If you compare it to yours, i suppose stock, XTC module you'll notice how much is it close to the original red channel with structure switch on. If you...

I managed to borrow a Shure SM58 so i'll redo a proper recording, the sound coming from my camera mic is very thin compared to the "live" sound and it add also some distorsion. With the gain @ 9:30/10 in plexi mode with or without the gainboost engaged the module produce a very clean sound (a...

Thanks! Tomorrow i'll upload a clip, too bad i couldn't manage to borrow a mic to record it properly. I found a nice picture of the new revision board, so i'll upload an alternate schematic/part list file. edit: Here's the file for the new revision board (taken from a 1086 picture) I...

Here's a mod for every Brit PCB (plexi, Sl+, Ultra etc.). What i've done is put 2 switch (spdt On/On) to add a gain boost and a "channel switching" between hotrodded plexi mode and hotrodded jcm800 mode. I tried to make it as simple as possible without cutting/rerouting traces on the pcb so it...

Grettings to all it's my first post here, i apologize for my bad english. Don't know about midi enough to come up with some idea but... recently i just fineshed cloning the entire OD channel of the Bogner Ecstasy (Plexi mode, structure, and blue red channel switching, plus a tight switch) on my...