I should have noted that I do run the SYN-2's in master/slave mode, and have the units inserted into a loop on the GCX. This allows me to run a couple of pedals prior to the preamps, with the rest of the pedals/rack processors after the preamps, but before the power amp.
Thanks webrthomson. I assume when you say "patch", you're talking about the preset buttons? I was able to get it working over the weekend by programming preset buttons with CC messages.I did have to put the SYN-2 units on different MIDI channels, as I was consistently getting one channel that...
Thanks again RMosack! I'm going to mess with this more today, and try what you have suggested. After going through the GCP manual a couple of dozen times, I think I'm finally starting to wrap my head around how this thing works.I think that part of the problem is that I never physically created...
Hi RMosack, thank you for the response. I've been trying to save the selections according to what the Synergy manual states as far as selecting a button on the pedal and holding in the store button on the SYN-2 unit, which I'm assuming is a PC command? I haven't used MIDI in close to 20 years...
Hi everyone! I'm currently running two SYN-2's with a GCX and GCP. I'm in need of some help setting this up and get the GCP to do the channel switching of the SYN-2's. At this point, I have only been able to get the GCP to switch the loops of the GCX, and am unable to switch the SYN-2's. If...