Im looking for a way to retrofit reverb into my RM20bp and need some feedback on my crazy ideas before I spend any money.
So far the my solution is to hook up a reverb pedal to the FX loop with a ebtech line shifter and use the DC from the fan to power it. Will this work?
1. The 12at7 seems like an obvious choice. Ill try it
3. I believe its the rm50 boost tat maxes the volume. My guess is that the fx loop tube (V2) is the tube boost. A 12at7 could be a good choice there too.
4. as anyone sucessfully powered fx from this?
5. So theoretical I could record the...
Hi,
Ive searched the internet extensively and still have a few question for experienced RM20 owners.
1. The phase inverter socket is labelled 12ax7. Is it recommended and what would be the effect of putting a 12at7 in there?
2. Is the FX loop -10db for stomp boxes or +4 for rack units?
3...
I had a Gmajor and it died twice on me. The last time I had it fixed then sold it. I think these units have spotty reliabilty. My old Digitech TSR-24 is 3 times older and hasnt missed a beat
Recorded my CD with with an RM100 loaded with 1086, ultra and blckface.http://www.youtube.com/watch?v=MlNtPSx2URo
This was recorded using the mic eliminator
http://www.youtube.com/watch?v=u2sDPFhfL-4
At this point I only have a blackface module and I'm using a Danelectro Transparent Overdrive...
These two fuses had me stumped before too. It seems like every time I take the amp out of its chassis some of the covering gets pulled out. Ive resorted to cutting the loose bits off.
Currently im using a pair of 6v6's. When turned up the tubes compress the sound allot. I usually set it just before the compression begins. I also bias them on the cool side so I guess im running about 25-30 watts.
It worked! I had a great night and no problems with the RM100.
Heres Proof :)
Alittle blues
http://www.youtube.com/watch?v=F1Kd9H32WUA
http://www.youtube.com/watch?v=K_MyJMUVbLQ
The last time I had this amp break down I had to take it to a tech. It seems he had left a 2" long stick of solder inside the amp to bounce around freely.
I removed the stick of solder and the amp has be fine ever since. I can only speculate how this could cause my trouble but it is the only...