Search results

The BE/BB module is supposed to have a good clean. The Vai module A channel is from the Bassman and it gets pretty clean. The best clean IMO is the TDLX module.

Make sure your MT100 and Helix are on the same midi channel. Select the patch on the Helix then select the preamp on the MT100, hold the midi button down until it flashes. Pretty sure that's how I do it with my Mod50/Syn-2 and HXFX rig.

I've got 2 Syn-2's plugged into a Rocktron Power Station and hot switch them all the time. Should be ok with your Furman.

When I gigged with my Mod50 I used pedals through the VX module on the A channel and they always sounded good. Here's a video (excuse the crappy playing) of my pedalboard through the TDLX module in my Syn-2 (using Mod50 power section): https://youtu.be/h4_ScNL1c-c

Been jonesin' for a brown face Tremolux or Bandmaster lately - not sure why. So just to hear what my mono pedalboard might sound like I hooked it up to my Synergy rig (normally connected to an old Dean Markley DR-40) and my TDLX module. Sounded much better!!!! https://youtu.be/h4_ScNL1c-c

Thought I saw one on Facebook Marketplace this weekend.

That is really depressing news. RIP

Ghierro- what is your signal chain? From there I can help you figure out how to hook up or set up effects in HXFX.

The Egnater VX A channel will get clean as well. If you're looking for Vox chime that module works great.

I've got 2 Syn-2's connected to a Mod50 without a loop switcher. Works perfectly. This thread has the details. http://mtsforum.grailtone.com/viewtopic.php?f=28&t=23588&p=161429#p161429

I would also consider Two Note Wall of Sound plug-in. You can select speaker and power amp IR's. Made a big difference for me when playing through headphones.

My cover band did everything from the Beatles to Tool with a bunch of 80's and 90's stuff. I gigged with my Mod 50 with the VX and SL modules. When I shifted to just a GSP1101 (modeler) straight into the board most of my presets were based on a Plexi. With a Syn-2 I would think the BB/BE and...

The new Diezel Herbert module launches tomorrow (9/16). MSRP $399.99 Diezel Herbert Pre-Amp Module Features: • Two channels with separate gain and volume on each • Global three band EQ • Mid-Cut on-off switches for each channel • Separate blue & red channel mid-cut level controls allow you to...

A Syn-4 would be awesome.

RM - Correct. There was some smoke damage I believe but most of the fire was contained to the business that shares the building with BAD.

I don't have all the piece just a couple. Best bet would be to get it from Yuneo. I think mine took about 5 days, it was quick.

I might have one. Let me make sure I've got all the parts.

The left main out is going to the Rack Interface to feed a dry signal to the effects. The To Amp In is going to the front input on my Mod50. The signal is being passed through the rack interface .

Scott - here is how I have mine connected to my Mod50. I think it's a little different than what the manual states to do.

Have you tried using different outlets for power? If you can make sure they are on different circuits. I've got a HXFX in 4CM with my MOD50 and I don't have any hum. Do you get hum if you put the HXFX only in front or in the loop of the RM50?