Search results

From the 800's manual https://www.synergyamps.com/wp-content/uploads/2020/06/SYNERGY-800-MODULE-MANUAL-V1.pdf: "If you’re on the hunt to add that original amp's characteristic bite to your Synergy rig, the 800 preamp module is where you'll find it. We went to great lengths to ensure this module...

2C+ Herbert:

Not sure about the Synergy ones but Egnater used to do one called the SL2x which was pretty much just the AFD module - they are dual channel like the Synergy ones and still about - demo here: https://www.youtube.com/watch?v=sdc22Y7-d2k (Check out 3:50 or so) As for the Synergy ones I dont...

The older Egnater and Randall MTS system are single channel, the switch in the BB/BE lets you choose what channel will be used in that kit by default :)

Nice set of modules - I've got the 800 and VH4 and like both of them a lot :) I was particularly impressed with the 800, it reacts like the real thing hitting the front end with a boost!

Yeah I didnt like the HBE at all with it in setting 2 - it's default - try it in the 3 (SLO) setting - I like it much better using that one :)

I had something similar when I hooked up my 2 SYN2's and it was down to the little buttons that toggle the loop level - one is -4db and one is +10db. Make sure you are set to +10DB and I think you should be good.

I do a pair of KT88's and a pair of EL34's - sounds massive :)

^ Pretty much this - Egnater offered a SL, SL2 and SL2x SL = superlead (plexi), SL2 = hotrodded superlead, SL2x = even more hotrodded, the GNR mod if you like :) Youtube of a Egnater SL2x: https://www.youtube.com/watch?v=sdc22Y7-d2k Bruce also did a dual module of his EG preamp called an...

I did have a look at the GCP manual and I could not work out how to get the IA setup to switch anything other than the GCX - I'd get in touch with Voodoo directly they are generally really helpful! I like the Fryette a lot its very neutral so when using something that should have a EL34...

I currenlty run 2 Syn2's using a ground control pro (I'm not using a GCX with this, I'm routing using an Ampette switcher): I set it up like this: Setup both Syn2 to the same midi channel in the CGP (master config menu, set device, set midi channel) Set up the SYN2 in master / slave mode...

Hey - I've PM'ed you Bruce Egnaters email address - he'll get you sorted! :) Ross

If you have a level diference check that the switch next to the jack marked "From amp to FX send" is in the high position - that fixed it for me :)

Not used the form but BAD, the comany that makes Synergy, are (were?) shut down at the moment.

I use a Voodoo labs Ground Control Pro - amazing bit of kit - use it to control both my SYN-2's, my Ampette amp switcher and my Diezel Herbert: http://www.voodoolab.com/gcontrolpro.htm

I went rack: Sounds great, althought I have a Egnater Mod50 as well and that is one of the best sounding amps I've ever heard! I dont think you could go wrong with either :)

^ that is good to know Ned - I've been thinking about ditching my pedal board for a while and knowing the Helix can do this moves it up the list of possible replacements! Do all the different versions support this like the stomp etc.?

The limitation here is likely to be the helix actually. The SYN-50 will change any time you tell it, but I would be reasonably willing to bet that the helix does not support sending different midi patches to the same midi channel inside the same Helix patch. I dont own a Helix so I cant tell you...

I dont see why not - you should be able to connect the midi out on the GT100 to the midi in on the SYN2 and send patch changes to it. To test this simply set both the GT100 and the SYN2 to omni mode and press the first 4 patches on the GT100 (assuming they are sending midi patches 1-4, unless...

Very tempting - I was going to buy the BMan but this has me thinking this might be cool instead :)