HELP! Midi phantom power stopped working Rm100!

[reilly]

The phantom power on my RM100 stopped working yesterday at practice I tried a different midi cable and still no luck. I know both of the cables are working fine, my foot controller is not being powered by the midi cable (neither the randall 3 button switch or my ground Control Pro). If i use a adapter to power it everyrthing works fine. Anyone no how to fix this quick? I have a gig and would like to fix this before if i can if not i can get by with the power adapter.

 

[jmgman70]

I think there is a fuse in the phantom power section in the chassis if I remember correctly,someone will know for sure here.

 

[reilly]

i pulled the chassis out last night and looked at the fuses they all looked fine, maybe i missed something and i should just replace both of the anyway.

 

[okstrat]

i pulled the chassis out last night and looked at the fuses they all looked fine, maybe i missed something and i should just replace both of the anyway.

You can't tell by looking, you need to put a meter on them and see if they have continuity from end to end.

Pete

 

[reilly]

do you know what the replacement fuses are

 

[jmgman70]

do you know what the replacement fuses are

The fuses will most likely be labeled..Make sure that if you check the fuses,make sure that you pull them out first...

 

[MetalMajik]

I got my midi board fuses from egnater. He says you will not find them anywere. they are 1.25 amp black and round, a little smaller than a dime and they have 2 prongs on the bottom of them