ungarn
New member
I have just joined the ?Randall Army? with a halfstack found on craigslist. I think that I did OK for $250?here is what I now have:
Head: RG100HB
The board inside is labeled ?Randall RG80 Amp? with serial number B3234 9637.
Cab: RA412JB (4x12 Jaguar speakers)
I have had very little luck finding info on this exact amp, and am ignorant regarding Randall?s in general. Here are a few questions that I have (posted on a few forums):
The serial numbers for both start with ?97? does this mean that they are 1997 vintage?
Where can I find a manual online for the head/amp?
Are there schematics available?
Are there any MODS available to improve the tone, touch response, crunch, etc.? I have modified pedals and such and am handy enough with a soldering iron. It is loud as hell but not as gainy as I thought it would be. Guess that it is like a solid state JCM800.
What footswitch do I use? There are two separate jacks on the back, one labeled ?Channel Footswitch? and another ?Kicker Footswitch??
Can a Dr. Z Airbrake be safely used with this head for home use? My Wife and Kids do not really appreciate my newfound VOLUME!
How can I make it sound better? I have read some threads regarding boosting to improve the gain/distortion. Is this done with the clean channel 1, dirty channel 2, or both? I have some overdrive and distortion pedals available but would appreciate some tips!
What is the deal regarding EQ?s? Other threads indicate Furman Parametric, or MXR 6-band?is this done in front of the amp or in the effects loop?
Last but not least?sample control settings would be most appreciated!
Sorry to ramble on, just excited about my new gear.
Best regards and thanks in advance!
-Thad
Head: RG100HB
The board inside is labeled ?Randall RG80 Amp? with serial number B3234 9637.
Cab: RA412JB (4x12 Jaguar speakers)
I have had very little luck finding info on this exact amp, and am ignorant regarding Randall?s in general. Here are a few questions that I have (posted on a few forums):
The serial numbers for both start with ?97? does this mean that they are 1997 vintage?
Where can I find a manual online for the head/amp?
Are there schematics available?
Are there any MODS available to improve the tone, touch response, crunch, etc.? I have modified pedals and such and am handy enough with a soldering iron. It is loud as hell but not as gainy as I thought it would be. Guess that it is like a solid state JCM800.
What footswitch do I use? There are two separate jacks on the back, one labeled ?Channel Footswitch? and another ?Kicker Footswitch??
Can a Dr. Z Airbrake be safely used with this head for home use? My Wife and Kids do not really appreciate my newfound VOLUME!
How can I make it sound better? I have read some threads regarding boosting to improve the gain/distortion. Is this done with the clean channel 1, dirty channel 2, or both? I have some overdrive and distortion pedals available but would appreciate some tips!
What is the deal regarding EQ?s? Other threads indicate Furman Parametric, or MXR 6-band?is this done in front of the amp or in the effects loop?
Last but not least?sample control settings would be most appreciated!
Sorry to ramble on, just excited about my new gear.
Best regards and thanks in advance!
-Thad