RM100 w/ Dual Channel Mod MIDI question

[alboz28]

Hello Folks,

Anyone out there with an RM100 dual channel modded head that is using a MIDI controller to switch channels? What MIDI controller are you using or if you are using a multiFX device to do the task ?

Thank you !

 

[Lespauled]

Any midi controller will work, as per the manual. MIDI IN:: For channel selection. Used as the input for the RANDALL (RF3) 3-button foot controller, or other midi controllers.

RM100 MIDI guide

https://www.randallamplifiers.com/wp-content/uploads/sites/9/2020/03/RM100-MIDI-guide.pdf

 

[galao]

The MIDI-floorboard should be able to send Program Change messages and have at least six buttons to access all channels. Harley Benton MP-100 is quite cheap and works properly. If you have a higher budget you could consider a Morningstar board.

 

[alboz28]

The MIDI-floorboard should be able to send Program Change messages and have at least six buttons to access all channels. Harley Benton MP-100 is quite cheap and works properly. If you have a higher budget you could consider a Morningstar board.

Thank you for the info, exactly what I was looking for