Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="GtrGeorge!" data-source="post: 66434" data-attributes="member: 1132">Midi isnt that tough.  Basically a midi footswitch is just a remore control with a wire. Now just make sure the settings are correct so the message your footswitch is sending can be "heard" by the amplifier.  Its not any harder than that.   To find out what the default setting is, look at your manual. If unsure, call or email Randall. Or do  post here and ask..although we arent Randall, as you know.             There are only 16 channels to midi..so in a worse case sceneario..you could try each one time and eventually get the setting correct, but trial and error sucks..especially if you are unsure of midi, and have little experience with it.  I suggest find out what the unit should set to (in the amps dip switches) and set it to that..then see if your footswitch now works.      GtrGeorge  ...a fan of your Keith Urban,btw.</blockquote>