Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="marl3y" data-source="post: 163697" data-attributes="member: 1737"><p>You're talking about two different things... The ability for the Randall amps to use both channels of a module is determinedly the MIDI switching circuit. The wiring is obviously there, are there are replacement board solutions for this. Using the Herbert module is all about voltage supply to the module. This post is related to that solution. As near as I can tell it will work for the first slot in Egnater and Randall 50 watt amps, and first and second slots in the 100 watt versions. Either way, if you have a stock Randall amp only one channel of the module will be accessible. I hope this all make sense. Good luck.</p></blockquote><p></p>