Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="btownninja" data-source="post: 159952" data-attributes="member: 4105">Working with Sweetwater on an RMA, but wanted to do a couple updates here. I appreciate all the replies so far, but I don't think I'm really getting anywhere. It's hard to explain, but so easy to hear in person. I'm still not sure if this is a quirk of the module or a problem. What I would really like to see is someone else set theirs up with a DI (cab sim enabled) and record a clip red channel, max gain, and module volume from  0 to 100 volume.  Sweeping from 50% to 100% with max gain is the easiest and most clear way to hear the difference. Even on the blue channel with like 20% gain, I can hear the difference, but it's not as drastic. I recorded two videos on this topic. They are both poorly shot, but still demonstrate the issue (ignore the mess, this is a brand new home office that I'm still setting up).These demos have a new example. I set the module to about 70% volume, record through my looper, then compare that loop at maxed output (clipping) to the module maxed output (clipping) to show the huge difference in tone. it would be pushing the interface the same in either scenario. I do the same with my amp test.First video shows this issue using the DI with cab sim:https://www.youtube.com/watch?v=2WNdU-KA1DMSecond video shows this issue using my Katana wired 4 cable method as shown in the last post:https://www.youtube.com/watch?v=hdFVb8lkzGs</blockquote>