I do have 5 SYN-2 preamps.
Is it recommended to link the preamps in each fx-loop?
Or to use a switchable looper and hook each SYN-2 up in a programmable loop.
Is it recommended to link the preamps in each fx-loop?
Or to use a switchable looper and hook each SYN-2 up in a programmable loop.
(b.t.w. how does Synergy this at NAMM to demo their modules?)HOW DO YOU HOOK-UP 2 SYN2S TOGETHER?
The best way to do this is to use the four cable method (4CM) and program the second Syn2 with the first Syn2 in bypass mode.
Guitar to ‘INPUT’ (INST IN) in the first SYN2 in the signal chain (Master unit) – use the front or back input.
From ‘TO AMP IN’ of the Master to the ‘INPUT’ of the second SYN2 (Slave unit) – again, either input, but in this case I’d use the back.
From the ‘MAIN OUT’ (L MONO) of the Slave to the ‘FROM AMP FX SEND’ of the Master.
From the MAIN OUT to a power amp, DAW or front of house. You can even try an external amp head’s FX return.
With the Master set to Bypass the Slave is active
One foot switch can control all (you will need a midi controller multiple presets and banks)—just need to connect MIDI THRU of the master (or first) SYN2 using a standard 5-pin midi cable, to the MIDI IN of the 2nd SYN2.