Z Zacky_V Member Joined Aug 15, 2007 Messages 7 Reaction score 0 Dec 2, 2007 #1 i just got a rm 100, and a 4x12 randall cab. im new to the whole half stack thing and was wondering what i should have my ohm settings at
i just got a rm 100, and a 4x12 randall cab. im new to the whole half stack thing and was wondering what i should have my ohm settings at
J JKD Well-known member Joined Apr 3, 2007 Messages 5,021 Reaction score 0 Location NorCal Dec 3, 2007 #2 Zacky_V said: i just got a rm 100, and a 4x12 randall cab. im new to the whole half stack thing and was wondering what i should have my ohm settings at Click to expand... You set your amp Ohm selector to match the speaker cab. There should be some label by the jack on back of your cab. If its a Randall MTS cab you have 3 options, 2 with switch set to Mono and one with switch on Stereo: Stereo - plug into either jack and set head to 8Ohms. This operates cab on two speakers only (left or right hand side) Mono 4 Ohms - plug into jack on left hand side (looking from rear) this drives all 4 speakers Mono 16 Ohms - plug into jack on right hand side (looking from rear) this drives all 4 speakers
Zacky_V said: i just got a rm 100, and a 4x12 randall cab. im new to the whole half stack thing and was wondering what i should have my ohm settings at Click to expand... You set your amp Ohm selector to match the speaker cab. There should be some label by the jack on back of your cab. If its a Randall MTS cab you have 3 options, 2 with switch set to Mono and one with switch on Stereo: Stereo - plug into either jack and set head to 8Ohms. This operates cab on two speakers only (left or right hand side) Mono 4 Ohms - plug into jack on left hand side (looking from rear) this drives all 4 speakers Mono 16 Ohms - plug into jack on right hand side (looking from rear) this drives all 4 speakers
Z Zacky_V Member Joined Aug 15, 2007 Messages 7 Reaction score 0 Dec 3, 2007 #3 what is the benifit of running 4Ohms mono vs 16Ohm mono and vice versa
3 3 Mile Stone Well-known member Joined Aug 28, 2006 Messages 702 Reaction score 0 Location Tejas Y'all Dec 4, 2007 #4 One would not really be better than the other. It's just that those are the correct loads for the speaker configuration you have. Try it and see which one sounds good to you.
One would not really be better than the other. It's just that those are the correct loads for the speaker configuration you have. Try it and see which one sounds good to you.
R RD/Steve Well-known member Joined Nov 8, 2007 Messages 505 Reaction score 0 Location wrigley field Dec 4, 2007 #5 in my experience...the lowing the ohmage, the tighter the response.