RH50T can put any kh module on it?

[lordbob]

hi guys,
(sorry for my english,i'm from belgium)
i got a rh50t, i'd like to put some kh module on it, is it possible?
if it is not, i'd buy a rm50
any advice, thnx guys
i got a R412cxm + LTD kh602
i like randal so much....

 

[wengnutt]

The RH50T isn't an MTS series amp so it won't take modules. If you're looking for a two channel switcher, the RM50 is the way to go

 

[lordbob]

i have the opportunity to buy a rm0100b + 4 modules for a good price
is there so many differences between al those rm100 heads?
i play mostly metal (metallica-pantera....)
thnx guys

 

[headown]

If you can get a RM100 with 4 modules for a good price -get it.
You can?t go wrong.

 

[lordbob]

it's a rm100B

http://www.kapaza.be/detail/21230845

lamps are 6L6, i dont know a lot about it... is it ok?
modules are : Clean, Ultra XL, Recto, Ultra
+ Footswitch

any module good for metal , heavy sound ?
thnx

 

[buriedorburned]

Ok, you have the Ultra XL, Recto, and Ultra there, basically you're spoilt for high gain choices mate.

The Recto is a great hard rock / metal module.
The Ultra is great for metal.
But the Ultra XL is the most high gain, over the top metal module Randall personally offers, you can't go wrong!

My advise is get the amp, put the Clean in slot 1, the Recto in second, and the Ultra XL in third. Then if you're happy with it, look into getting the Ultra modded by one of our great modders on here, or even just trade it for another module with another member.

 

[lordbob]

thnx a lot for this information, i'll get it next week and i'll write my comments.
randall rocks

 

[lordbob]

i'll get my rm100b this saturday, but i've got a randall 4x12 cxm
will it be ok with my rm100? it's a cheap 4x12 cab(300euros)
how about ohms? i dont understand difference between 4-8-16 ohms
thnx guys for helping me
:wink:

 

[Baco]

i'll get my rm100b this saturday, but i've got a randall 4x12 cxm
will it be ok with my rm100? it's a cheap 4x12 cab(300euros)
how about ohms? i dont understand difference between 4-8-16 ohms
thnx guys for helping me
:wink:

I hadn't seen that amp pop up, you lucky guy

I've checked this cab and you may have a problem. The RM100 amps are 4/16 Ohm mono or 8 Ohm stereo. The cab you seem to have is 8 ohm mono or 4 ohm stereo :?

BTW, if you'd like to compare some modules, you're welcome :wink:

 

[JKD]

All the RM100 amps have a Main/Extension output and an 4,8,16ohm selector right?

He can set his amp to 8Ohms and plug in the 8Ohms mono no probs I think.....

 

[lordbob]

"He can set his amp to 8Ohms and plug in the 8Ohms mono no probs I think"

will it sound ok? or do i have to buy a better cab?

 

[Baco]

All the RM100 amps have a Main/Extension output and an 4,8,16ohm selector right?

He can set his amp to 8Ohms and plug in the 8Ohms mono no probs I think.....

Silly me, you're right

I was throwing my XL cab in the mix, which is 4/16 mono or 8 stereo, sorry about that

Should work without any problems, indeed. Just put your head on 8 Ohm and you're clear to go. I don't know how these speakers sound, but hey, you've got a good start, a killer head :twisted:

 

[Baco]

So, did you get the RM100?

 

[lordbob]

yeah a killer head really!!

i like the ultra xl module, but maybe too much distortion, i need to fix my settings ....
the clean module is ok, nothing special
the ultra module compare to the ultra xl .... i use the ultra xl
the recto one is nice for crunch'ac/dc)

after 5 h playing , im really enjoy this head