RM100 - Where in the chain is the slave out tapped?

[jgk62]

Is the slave out pre-power amp?
As in does it go thru the module and all other 12ax7 tubes, then out to the slave
OR
does it take the entire signal including power amp and send it to the slave output?

I'm thinking about sending a signal from the head into a PodXT Pro (for effects only) then into a Mesa 20/20 into a stereo cab for my wet signal.

Or would the effects send be a better option?

I did a quick search but still needed more information.

Thanks in advance. This forum has taught me so much about these amps already.

 

[RD/Rich]

THe slave out takes it's signal from right after the modules so it's going through 3-12ax7's. It works the same as if you just tapped the Serial Loop's send, and should work perfectly w/ wanting to send signal to the Pod XT for FX.

 

[jgk62]

Thanks for the info!

 

[Soulinsane]

Um, are you sure about that Rich? The slave out on mine is tapped from the speaker mains.