Dual Syn-2's and Mod 50 Wiring

[ned]

Finally figured out how to connect 2 Syn-2's and my Mod50. Gives me 12 channels of goodness

Mod50 Return to Master Syn2 'from amp return'
Master 'from send' to Slave L (mon) output
Mod50 Send to Slave ' from amp send'
Slave 'to ext amp' to input of Mod50
Master 'to ext amp' to input of Slave

Ignore the cable coming from the master L output, should be connected to the slave out on the Mod50. Also need to make some more cables but I haven't unpacked the garage yet from the move

And yes, the jumper on the parallel loop makes a huge difference

 

[JKD]

In your setup, os the top SYN2 the Master or the bottom?

 

[ned]

Top Syn-2 is the master. It's loaded with a T/DLX and Vai. Bottom has a HBE and SLO. Mod50 has a VX and either a SL2 or EG3/4.

My SL2 has gotten really buzzy sounding - tube?

 

[ned]

Here is an updated picture.

Guitar to Input of HXFX, HXFX Send 1 to front input of Master Syn-2

 

[RMosack]

Here is an updated picture.

Guitar to Input of HXFX, HXFX Send 1 to front input of Master Syn-2

So there are two changes from your prior picture?
1) You got rid of that unnecessary cable coming form the Master SYN-2's L/Mono Output jack
2) You have a Line 6 HXFX plugged between your guitar and the Master SYN-2, but that cabling is not visible (in front of rack).

Is that correct?

 

[ned]

Sort of. I've had the HXFX connected the entire time and always to the front of the master Syn2, The cable from the L out was just plugged into the wrong spot which I called out. It should have always been in the Mod50 Slave Out.

I probably forgot to point out about the HXFX going to the front input.