bruce egnater
Well-known member
This is a one of a kind, handwired, custom amp head I built. Basically a finely tuned, hot-rodded Marshall with a few cool additions. Plenty of gain for all but the most high gain, "over the top players".
50 Watts w/Pair of Tung-Sol EL34B tubes
Four 12AX7 tubes
Tube buffered effects loop
Single channel w/ footswitchable "solo" volume boost. Pedal included.
High gain input.
High gain_Tight input
Clean input
EQ Voicing switch (60s/70s)
Footswitch jack for boost
Three position Standby switch. Full power fixed (internal adjustable) bias / OFF (Center), 15 watts cathode bias.
Brushed metal logo (looks cool)
4/8/16 ohm impedance selector
Sounds fantastic !!
NOTE: There are a couple of repaired, scuff marks on the cabinet rear (see photos)
$1500 incl. UPS/Ground shipping in the US. Email me at [email protected]
Photos here>>>>> http://s28.photobucket.com/user/begnater/library/
50 Watts w/Pair of Tung-Sol EL34B tubes
Four 12AX7 tubes
Tube buffered effects loop
Single channel w/ footswitchable "solo" volume boost. Pedal included.
High gain input.
High gain_Tight input
Clean input
EQ Voicing switch (60s/70s)
Footswitch jack for boost
Three position Standby switch. Full power fixed (internal adjustable) bias / OFF (Center), 15 watts cathode bias.
Brushed metal logo (looks cool)
4/8/16 ohm impedance selector
Sounds fantastic !!
NOTE: There are a couple of repaired, scuff marks on the cabinet rear (see photos)
$1500 incl. UPS/Ground shipping in the US. Email me at [email protected]
Photos here>>>>> http://s28.photobucket.com/user/begnater/library/
