Jaded Faith said:bruce egnater said:In the end I continued to use my standard ISP and it still serves me well to this day.
Rob,
How are you running your ISP now? in front or after your pedals? Obviously you're not running it in the loop.
Jaded Faith said:bruce egnater said:In the end I continued to use my standard ISP and it still serves me well to this day.
Rob,
How are you running your ISP now? in front or after your pedals? Obviously you're not running it in the loop.
Jaded Faith said:For reference, here is my typical live signal chain:
Guitar - X2 wireless - Wah - Volume - Clean Boost - ISP - Amp - Loop send - Tremolo - Chorus - Flanger - Delay - Reverb - Loop Return
" I am a pateint boy, I wait, I wait, I wait I wait"bruce egnater said:Not sure you understand how the ISP G-String works. It has in/out for the noise reduction part that usually goes in the loop. It also has a guitar in/out to amp loop. The process is different than all other gates or Hush because it is triggered by the guitar signal, not the noise level. This means the ISP doesn't know or care how much noise there is. When you adjust the threshold, you are setting the trigger level from the guitar. This allows you to still use some dynamics in your playing without the gate "chopping" it off as most do. It is the best noise reduction system for guitar, bar none. That is why we licensed it to build into our new Armageddon amps that will be out end of summer.
tung said:thanks for the tip.raz311 said:Big +1 on the ISP. I used one in my RM100 series loop for ages and it did the trick. However when I started using an OD in front of the amp it was too noisey with the amp gain and the OD even with the ISP. So I bought a second ISP and put it after the OD in my chain and it is dead quiet even at high volume! I suppose a G String pedal would do the same, or the Pro Rack G.
I'm looking for one right now, if anybody is selling a used one, PM me 8)
Enter your email address to join: