Module repair?

[rockjunky]

Anyone know of anyone in the Long Island NY area that can repair a gain pot on one of the modules? I have a Ultra module that the gain pot just spins and the gain setting is stuck in one position.

Thanks
John

 

[Bewitagos1]

Anyone know of anyone in the Long Island NY area that can repair a gain pot on one of the modules? I have a Ultra module that the gain pot just spins and the gain setting is stuck in one position.

Thanks
John

John, have you taken off the knob to see if the knob is slipping or if the shaft is spinning inside of the pot? might be an easy repair if its the first problem.

Jimmie

 

[harsh]

Hey John...I suspect its probably just a loose knob. Try pulling the knob off and try a DIY fix like a piece of paper between the tone shaft and the knob. That should do the job.

 

[rockjunky]

Hey guys thanks for the replies. It not the knob it's the pot I'm 100% sure of that I have had problems with knobs and plan to change them all over at some point but it the pot on this module.

Thanks
John

 

[rockjunky]

Double post...

 

[Jaded Faith]

John,
I am in NJ and just sent you a PM with repair costs and shipping info. I'll always do repairs for anyone interested.
Rob