Rack handle for Randall RT2/50?

[Lumpy Trousers]

Anyone know where I might find a rack handle for a Randall RT2/50? I just picked one up, but it's missing a rack handle.

Also, anyone ever have trouble with the bias points? I think someone jammed some really large leads in this one - two of the channel one points were loose and flopping around - I solved this with a wee dab of solder. However, one of the bias points on channel two isn't working at all, and it's a lot harder to access.

 

[wesarvin]

I have an rm50 head that has trouble with the bias points too. The first one doesn't work at all. Hmm...

 

[Lumpy Trousers]

I opened up my RT2/50 to look at the bias points - there's a hole in the top of them (small white plastic sockets). If you press down through the hole, it seems to push a small metal clip down and make the connection tighter. In my case the sockets were actually torn off of the circuit board, so I also re-attached with a very small dab of solder.

The problem I have now is the second row of bias points isn't easily accessible. There's a row of circuit board (channel 1 bias points) above them that's attached with screws that are covered with lock tite. If I can get that off without stripping the screws or damaging the board I may be able to get the other one working.