I am running an old analog Boss DM-2 Delay and a digital Digitech Hardwire RV-7 Reverb pedal in the parallel FX loop on my Randall RM-50. I have the effects level maxed out on both pedals so that they are only sending the wet effected signal back into the amp. I set the FX Mix on the font of the amp to about noon and expected to hear a 50-50 Wet to dry mix, but I could barely hear the delay or the reverb. I had to set the amp FX Mix knob at around 1:00-2:00 O'Clock to hear the effects. Is this normal? I thought that setting the amp's FX Mix knob at noon would equal a 50-50 wet dry mix, as long as the pedals were set to fully wet?
When I run these same effects into the front of the amp, I get a 50-50 wet dry mix when the FX level on both pedals is set to noon, so I dont think there is a problem with the pedals.
I usually only run the wet signal at about 35% when using reverb and delay; yet I need to set the FX mix knob on the amp above noon to achieve this level.
Any ideas as to what is going on would be greatly appreciated?
When I run these same effects into the front of the amp, I get a 50-50 wet dry mix when the FX level on both pedals is set to noon, so I dont think there is a problem with the pedals.
I usually only run the wet signal at about 35% when using reverb and delay; yet I need to set the FX mix knob on the amp above noon to achieve this level.
Any ideas as to what is going on would be greatly appreciated?