What are you using to eliminate hum/noise form your Syn rig?

[LuxxtoneBoy]

I’m getting some hum out of my Synergy rig (Syn 50/50 and 2 Syn 2’s) and would like to add a noise gate/noise suppresor to the rig. What are you guys using with your rigs?

 

[webrthomson]

I’m getting some hum out of my Synergy rig (Syn 50/50 and 2 Syn 2’s) and would like to add a noise gate/noise suppresor to the rig. What are you guys using with your rigs?

Fortin Zuul - easily the best noise gate that I've ever used, better even than rack mount stuff.

Not cheap though!

 

[tnjazz]

I use my FX8 front noise gate set between 50 and 60 depending on the guitar, and a gate block in the loop for drive channels (gate off for clean channels)

 

[shortlife]

You should not be using a Gate to bury the noise before getting rid of as much noise as possible via grounding and protection from electrical interference.

I use a fairly pricey Furman Power Conditioner and a Radial SB-6 Isolator to cure most of the problems and then a gate between the Preamp and Power Amp.

I own a TC Electronic Sentry, a Fractal Fx8 and a Fortin Noise Gate.
The Fortin gate using the key input is by far the best Noise Gate I have used.

 

[JKD]

ISP Decimator Pedal...it rules, though I have to say there's less hum/noise with Synergy than with my Randall stuff.

 

[RipperShred]

4-cable'd with a helix rack. Gated on the input stage, then on the back end too if need be. then all the FX I could ever want as well.

 

[danielmorrison]

The EHX Hum Debugger worked for me. It's not a gate so it will just eliminate the hum.

 

[ChrisB]

I picked up the Zuul after reading this post and watching some YT videos, what a great pedal!

 

[LuxxtoneBoy]

Where do you place the pedal in your rig?

 

[ChrisB]

It's the first pedal in the loop before the reverb and delay, I am also using the key input in front of my SYN50 with a boss tuner. What sold me was the Ola Englund video, it's worth the $$$

 

[Kingpapavega]

I need to check that out. I still have a little bit of background noise I need to eliminate.