4cm with jcm800 2203

[Kam_82]

Hello, I wonder if connecting with 4 cable method works well from syn-1 and jcm800 2203 and wondering if the output from syn-1 should go to the low or high channel. Or do I need to get a dedicated PA (Ksr) for example?

Best,

 

[metalmm785]

Hello, I wonder if connecting with 4 cable method works well from syn-1 and jcm800 2203 and wondering if the output from syn-1 should go to the low or high channel. Or do I need to get a dedicated PA (Ksr) for example?

Best,

It works great. I have tried it before with a 2203x since those have an effects loop, and it is a great option to add a clean module to the JCM800. You can use the SYN-1 to footswitch between the modules and the amp for two different sounds (Marshall distortion in the high input or clean/low gain, if you use the low input) and whatever module you load in the SYN-1.

You do not need a power amp. The SYN-1 will use the power section of the JCM800.