Last Friday we played a gig and my Rm100 was working perfectly. Today we unpacked our gear and I was setting my amp up. When I turned my amp the sound was really work and I saw a flash come out of the back of my amp near where module 1 would is installed. I checked to see if a tube went bad. All tubes are 4 months old and in good condition. Next I checked all the fuses located next to the tubes. All fueses are good. I tried unplugging effects from the series send/return and just plug straight into the head. All the tubes are lit up and the channels switch but no sound.
I'm relatively certain it's something I screwed up but not sure where. When I looked at the back of the amp I realized I was plugged into the extension and not into the main out of the head. The selector switch was halfway between 8 and 16 ohm. The fan is also still running.
So to break it down:
No sound.
Fuses are all good
All tubes are working
Was coming out of extension out and not main out (first mistake)
Stuck between 8 and 16ohm switch.
Flash of light came out of the back near where module 1 would sit.
Also there was a very, very slight burnt smell not very strong. My amp is at my buddies place, we'll take a look at it tomorrow but I was wondering if anyone else might have an idea as to what might have happened and a solution?
I'm relatively certain it's something I screwed up but not sure where. When I looked at the back of the amp I realized I was plugged into the extension and not into the main out of the head. The selector switch was halfway between 8 and 16 ohm. The fan is also still running.
So to break it down:
No sound.
Fuses are all good
All tubes are working
Was coming out of extension out and not main out (first mistake)
Stuck between 8 and 16ohm switch.
Flash of light came out of the back near where module 1 would sit.
Also there was a very, very slight burnt smell not very strong. My amp is at my buddies place, we'll take a look at it tomorrow but I was wondering if anyone else might have an idea as to what might have happened and a solution?